New Industrial Module 620-690nm Laser Sensor High Accuracy +/-1mm Serial Port 20HZ USB-TTL STC SCM 0.05-02M/05M/10M/20M/30M/50M/80M laser Distance Measuring Sensor


Independent development Laser Sensor Module for USB-TTL/STC-ISP programmer on line USB  interface,for laptop users
1. Support USB1.1 or USB2.0 communication;
2. Fully support WIN98,WINME,WIN2000,WINXP,VISTA,WIN7 etc.operating system;
3. USES USB port power supply, ,on board with 500mA self recovery fuse or insurance resistance,protect the computer motherboard from accidentally burned;
4. When program the chip ,you can use Target power system power supply ,also can use 
programming unit from USB port 
Take electricity supply target board,but need make sure the target current is not bigger than 500mA,to avoid cannot normal programming;
5.  Programming complete the program is running will not affect the target board;
6. support on STC series chip burn;
7. The programmer to provide 3.3 V and 5 V voltage output interface;
8.  Faster than parallel programming is more stable, more convenient laptop users use;
9.  Original good chip ,more stable



Scope of supply:VCC: 3~3.3VDC   Current: 100mA

Measurement range:0.05-02M/05M/10M/20M/30M/50M/80M

Accuracy of measurement:1mm
Angle measurements:-
Laser type: 620-690nm
Laser level: II level,less 1mW
Spot diameter in from m:6mm@10m,18mm@30m
Single measurement time: 0.05-1s
Protection grade:IP40
Working temperature: -10 to 60°C
Storage temperature: -20 to 80°C
Weight: About 60g



Product Search
Copyright(C)since2014 ShenZhen MoreSuns  Electronics Co.,Ltd